+380 44 538-00-06 многоканальный

Беспроводная точка доступа Aruba RAP-3WN, 802.11n, 3x10/100Base-T, USB

  • RAP-3WN

Где купить?

Наличие нет в наличии
Код товара 00000024289
Артикул товара RAP-3WN
Серия RAP-3

Условия покупки

Компания Мегатрейд не продает товар в розницу. Мы будем рады помочь Вам купить товар через наших Партнеров.

Также вы можете самостоятельно выбрать партнера из списка.

  • Характеристики Беспроводная точка доступа Aruba RAP-3WN, 802.11n, 3x10/100Base-T, USB

    Стандарт Wi-Fi 802.11n
    Wi-Fi скорость передачи данных 300 Мбит/с
    Частота 2,4 ГГц
    Сетевой интерфейс 3 x 10/100Base-TX
    Режим работы Wi-Fi Точка доступа
    Количество радио интерфейсов 1
    MIMO тип 2x2:2
    Максимальное кол-во BSSID на радио интерфейс 16
    Антенна/Коннектор 2 интегрированные всенаправленные антенны 2,4 ГГц
    Поддержка PoE Нет
    Тип исполнения Внутренний
    Серия RAP-3
  • Описание Беспроводная точка доступа Aruba RAP-3WN, 802.11n, 3x10/100Base-T, USB

    The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices.

    Centrally managed by Aruba Mobility Controllers, the RAP-3 extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center.

    To eliminate client stickiness, the RAP-100 series includes integrated ClientMatch™ technology, which continuously gathers session performance metrics and uses this data to every device to the best AP and radio on the WLAN, even while users roam and RF conditions change.

    The RAP-3 also offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management™ (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters.

    Delivering a wireless data rate of up to 300 Mbps, the RAP-3 has three 10/100BASE-T Ethernet ports and one USB port for connecting to 3G and 4G networks. It is also available with an 802.3af power-over-Ethernet (PoE) port (RAP-3WNP model) for IP phones or other devices.

    At locations that require greater coverage, the RAP-3 can join an Aruba Instant™ WLAN cluster. Simply install additional RAP-3s or any Instant AP and the entire cluster is managed as one. If one Instant AP fails, another AP automatically takes over with no disruption.

    For large installations, the Aruba Activate dramatically reduces deployment time by automating device provisioning, firmware upgrades and inventory management. RAP-3s are factory-shipped to your remote offices and configure themselves when powered up.

    Advanced Features Operating Modes
    • ClientMatch technology eliminates sticky clients by continuously gathering session performance metrics and using this information to steer them to the best AP and radio.
    • ARM delivers best-in-class RF management, including automatic transmit power and channel control with auto coverage-hole correction.
    • Zero-touch provisioning as well as automated firmware upgrades and inventory management with the cloud-based Aruba Activate service.
    • Security:
      • With an OpenDNS service subscription, Aruba Instant RAPs delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN
      • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
      • SecureJack-capable for secure tunneling of wired Ethernet traffic
    • Wireless
      • 802.11b/g/n Mobility Controller-managed RAP
      • 802.11b/g/n Aruba Instant AP
      • 802.11b/g/n air monitor
      • Hybrid WLAN and air monitor
      • Configurable to support 802.11n HT 20/40 channels or mixed-mode deployment IEEE 802.11b/g/n
    • Wired
      • 10/100BASE-T Ethernet, PoE capable
      • User authentication: 802.1X, captive portal, MAC authentication or open access
      • Policy-based forwarding for local resource access
    Wireless Radio Specifications Power In
    • AP type: 2.4 GHz 802.11n indoor
    • Software-configurable 2.4-GHz radio
    • 2×2 MIMO 802.11n with two spatial streams and up to
      300 Mbps wireless data rate
    • Supported frequency band (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz
    • Available channels: Managed by Virtual Controller or Mobility Controller, dependent upon configured regulatory domain
    • Supported radio technologies:
      • 802.11b: Direct-sequence spread-spectrum (DSSS)
      • 802.11g/n: Orthogonal frequency division multiplexing (OFDM)
      • 802.11n: 2×2 MIMO with two spatial streams
    • Supported modulation types:
      • 802.11b: BPSK, QPSK, CCK
      • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (aggregate) transmit power: +19 dBm (limited by local regulatory requirements)
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay diversity for improved downlink RF performance
    • Short guard interval for 20-MHz and 40-MHz channels
    • Space time blocking code (STBC) for increased range and improved reception
    • Supported data rates (Mbps):
      • 802.11b: 1, 2, 5.5, 11
      • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11n packet aggregation: A-MPDU, A-MSDU
    • AC-to-DC power adapter (included) – RAP-3WN:
      • AC input: 100-240 volts AC/0.5 A
      • DC output: 12 volts DC/1.5 A
    • AC-to-DC power adapter (included) – RAP-3WNP:
      • AC input: 100-240 volts AC/0.75 A
      • DC output: 48 volts DC/0.75 A
    • Maximum power consumption – RAP-3WN:
      • Maximum (excluding USB): 4.0 watts
      • Maximum (using USB): 6.5 watts
    • Maximum power consumption – RAP-3WNP:
      • Maximum (excluding USB and PoE): 5.5 watts
      • Maximum (using USB, no PoE): 8.0 watts
      • Maximum (using USB, full PoE): 26 watts
    Antennas Interfaces
    • Two integrated, omni-directional antenna elements for 2×2 MIMO
    • Antenna gain: 2.0 dBi
    • Network:
      • E0 (WAN): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
      • E1-E2 (LAN): Two 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
      • Optional 802.3af PoE (15.4 watts) on the E2 port for IP phones and other equipment
    • One port for DC power connector
    • One USB 2.0 port (Type A connector)
    • One four-pin console interface (custom)
    Mounting Mechanical
    • Desktop (using stand supplied with product)
    • Wall (using optional wall-mount accessory)
    • Dimensions/weight (unit, with desk stand):
      • 129 mm x 109 mm x 64 mm (5.1” x 4.3” x 2.5”)
      • 180 g (6.6 oz)
    • Dimensions/weight (shipping):
      • 218 mm x 150 mm x 64 mm (8.6” x 5.9” x 2.5”)
      • RAP-3WN: 510 g (1.1 lb)
      • RAP-3WNP: 620 g (1.4 lb)
    Environmental Regulatory
    • Operating:
      • Temperature: 0° C to +40° C (+32° F to +104° F)
      • Humidity: 5% to 95% non-condensing
    • Storage and transportation::
      • Temperature: -40° C to +70° C (-40° F to +158° F)
    • FCC/Industry of Canada
    • CE Marked
    • R&TTE Directive 1995/5/EC
    • Low Voltage Directive 72/23/EEC
    • EN 300 328
    • EN 301 489
    • UL/IEC/EN 60950
    Certifications Warranty
    • CB Scheme Safety, cTUVus
    • Wi-Fi certified 802.11b/g/n
    Limited lifetime warranty
    Minimum ArubaOS Version
    • ArubaOS
    • Aruba Instant 3.0
    Читать дальше
  • Видеоматериалы отсутствуют.

  • У данного товара, нет загруженных файлов.

    Загрузка комментариев...
  • Задать вопрос


    Вопросы и ответы