+380 44 538-00-06 многоканальный

AP-103

Multifunctional and affordable Aruba 103 series wireless access points (APs) maximize mobile device performance in medium-density Wi-Fi environments while minimizing interference fr om cellular networks.

These compact and cost-effective APs deliver wireless data rates up to 300 Mbps per radio employing 802.11n technology with two spatial MIMO streams.

The AP-103 and Instant IAP-103 models feature a 2.4-GHz and a 5-GHz radio, each with 2×2:2 MIMO and two integrated dual-band omni-directional downtilt antennas.

Advanced Cellular Coexistence (ACC)

Aruba’s Advanced Cellular Coexistence (ACC) feature enables WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment.

Wi-Fi client optimization

To eliminate sticky client behavior while users roam, the Aruba 103 series APs feature Aruba’s patented ClientMatch™ technology, which continuously gathers session performance metrics from mobile devices.

If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

Quality of service for Lync

Aruba 103 series APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

Best-in-class RF management

All Aruba APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, high-performance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.

Aruba 103 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections wh ere Ethernet drops are not available.

Choose your operating mode

Aruba 103 series APs offer a choice of operating modes to meet your unique management and deployment requirements.

  • Controller-managed mode

    When managed by Aruba Mobility Controllers, the AP-103 offers centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.

  • Aruba Instant™ mode

    In Aruba Instant mode, a single IAP-103 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.

For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.

If WLAN and network requirements change, a built-in migration path allows Aruba Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.

Specifications
Advanced Features Operating Modes
  • Spectrum analysis
    • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference
  • Security:
    • With an OpenDNS service subscription, Aruba Instant RAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN
    • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
    • SecureJack-capable for secure tunneling of wired Ethernet traffic
  • 802.11a/b/g/n Aruba Instant AP
  • 802.11a/b/g/n Mobility Controller-managed AP
  • Air monitor (AM) for wireless IDS, rogue detection and containment
  • Spectrum analyzer
  • Secure enterprise mesh
  • Remote AP (RAP) when used with a Mobility Controller
Wireless Radio Specifications Power
  • AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2×2:2
  • Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
  • 2×2 MIMO with two spatial streams and up to 300 Mbps wireless data rate
  • Supported frequency bands (country-specific restrictions apply):
    • 2.4000 GHz to 2.4835 GHz
    • 5.150 to 5.250 GHz
    • 5.250 to 5.350 GHz
    • 5.470 to 5.725 GHz
    • 5.725 to 5.875 GHz
  • Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
  • Available channels: Dependent on configured regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    • 2.4 GHz band: +21 dBm (18 dBm per chain)
    • 5 GHz band: +21 dBm (18 dBm per chain)
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20-MHz and 40-MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Medium-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 300 (MCS0 to MCS15)
  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11n packet aggregation: A-MPDU, A-MSDU
  • Maximum power consumption: 9.5W (POE) or 8W (DC)
  • Power sources sold separately
  • Direct DC source: 12 Vdc nominal, +/- 5%
  • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

Antennas Other Interfaces
  • Two integrated dual-band down-tilt omni-directional antennas for 2×2 MIMO with maximum antenna gain of 3.9 dBi at 2.44 GHz, 4.1 dBi at 5.2 GHz and 4.3 dBi at 5.8 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP.
  • 10/100/1000BASE-T Ethernet network interface (RJ-45)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • PoE-PD: 48 Vdc (nominal) 802.3af PoE or 802.3at PoE+
  • DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
  • Serial console interface (proprietary; optional adapter cable available)
  • Visual indicators (LEDs):
    • Power/system status
    • Ethernet link status (ENET)
    • Radio status (two; RAD0, RAD1)
  • Kensington security slot
  • Reset button
Mounting Mechanical
  • Included with AP:
    • Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling
  • Spare mounting kit:
    • AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails
  • Optional mounting kits
    • AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails
    • AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount bracket
  • Dimensions/weight (unit, excluding mount accessories):
    • 150 mm (W) x 150 mm (D) x 41.5 mm (H)
    • 5.9” (W) x 5.9” (D) x 1.63” (H)
    • 300 g (0.66 lbs)
  • Dimensions/weight (shipping):
    • 192 mm (W) x 178 mm (D) x 68 mm (H)
    • 7.6” (W) x 7.0” (D) x 2.68” (H)
    • 500 g (1.10 lbs)
Environmental Regulatory
  • Operating:
    • Temperature: 0° C to +40° C (+32° F to +104° F)
    • Humidity: 5% to 95% non-condensing
  • Storage and transportation temperature range:
    • Temperature: -40° C to +70° C (-40° F to +158° F)
  • FCC/Industry of Canada
  • CE Marked
  • R&TTE Directive 1995/5/EC
  • Low Voltage Directive 72/23/EEC
  • EN 300 328
  • EN 301 489
  • EN 301 893
  • UL/IEC/EN 60950
  • EN 60601-1-1 and EN 60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

Certifications Warranty
  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n
Limited lifetime warranty
Regulatory Model Number Minimum ArubaOS Version
AP-103 and IAP-103: APIN0103 ArubaOS™ 6.4.0.0
Aruba InstantOS™ 4.1.0.0 (planned availability mid 2014)

Другие линейки продуктов Aruba:





AP-103 – дистрибьютор Aruba

  • Беспроводная точка доступа Aruba AP-103, 802.11a/n, 2x2:2, два радиомо...
    11 788грн.

    Нет в наличии

  • Беспроводная точка доступа Aruba Instant IAP-103, 802.11a/n, 2x2:2, дв...
    11 788грн.

    Нет в наличии